Buying an electric vehicle (EV) is a great way to cut fuel costs and enjoy a smooth, quiet drive around Melbourne. However, relying on standard household wall plugs for charging is extremely slow. Even with a basic plug you’re only getting roughly 10-15km of range added per hour. This can mean charging your EV to full could take over 24 hours.
Having a level 2 EV charger installed means you can fully charge your vehicle overnight. Below you’ll find out how much an EV charger installation will cost you in Melbourne and what factors affect pricing. You’ll also understand how an EV charger with rooftop solar can help reduce your running costs.
How Much Does EV Charger Installation Cost in Melbourne?
Most households in Melbourne will pay between $1,250 and $4,500 (including GST) to purchase and install a Level 2 home EV charger.
This overall cost includes purchasing the EV charger and hiring a licensed electrician to install the unit correctly.
Hardware Costs vs. Installation Labour Costs
- EV Charger Hardware ($500 to $2,000): Basic 7.4kW wall chargers will cost approximately $500 to $900. Smart chargers with a phone app, solar tracking, speed settings and more will cost between $1,200 and $2,000.
- Installation Cost ($750 to $2,500): A licensed electrician will be required to mount your unit, run thick electrical wiring from your meter box and install safety switches. They will also test your unit and provide you with an official safety certificate.
Main Factors Affecting Your EV Charger Installation Price
Every Melbourne home is built differently. If your meter box is close to your car spot, the job is simple and cheap. If your house is older or your car is parked far from the meter box, the job takes more time and materials.
1. Your Electrical Switchboard
Older homes in Melbourne often have old fuse boxes or small electrical switchboards. A home EV charger uses a lot of power. If your switchboard is full or old, your electrician will need to upgrade it first. A switchboard upgrade usually adds $800 to $2,500 to the job.
2. Single-Phase vs. Three-Phase Power
Most Melbourne houses have single-phase power. Single-phase 7.4kW chargers add about 40km of range per hour. Three-phase 11kW or 22kW chargers add up to 120km per hour, but cost slightly more to install due to heavier wiring and switches.
3. Distance from Your Switchboard
The cheapest setup is when your charger is mounted right next to your electrical switchboard. If the electrician has to run long cables through your roof space, under floorboards, or along walls, the extra cable and extra labour time will raise the price.
4. Underground Trenching to Detached Garages
If your car is parked in a garage or carport that is separate from your main house, the electrician may need to dig a trench across your yard or driveway to lay underground power pipes. Civil digging and underground piping will add between $500 and $1,500 to the final bill.
5. Smart Features and Solar Connections
Smart EV chargers can connect to your rooftop solar panels. These smart units check how much extra solar energy your roof is making and send that power straight into your car battery. While smart chargers cost more upfront, they save you a lot of money over time by using free solar power instead of paid grid power.
Comparing Home Charging Solutions: Level 1 vs. Level 2
To see why getting a Level 2 wall charger installed is the best choice for daily driving, let us compare it to the basic cable that comes with most electric cars.
| Feature | Level 1 Cable (Standard Plug) | Level 2 Wall Charger |
|---|---|---|
| Power Output | 2.4kW (Plugs into standard 10A socket) | 7.4kW (Single-Phase) up to 22kW (Three-Phase) |
| Added Range Per Hour | ~10 to 15 km | ~40 km (7.4kW) up to 120 km (22kW) |
| Full Charge Time | 24+ hours | 4 to 8 hours |
| Electrical Connection | Standard home power point | Dedicated safety circuit from switchboard |
| Installation Needed? | No | Yes, installed by a licensed electrician |
| Best For | Emergency back-up or short trips | Daily driving, fast overnight charging, and solar power |
What Is a Type 2 EV Charger and Why Is It Used in Australia?
When shopping for an electric car charger in Australia, you will see the name Type 2 charger everywhere.
Type 2 Charger Definition:
A Type 2 EV charger is the standard plug design used for home AC charging across Australia and Europe. It features a 7-pin plug design that works with both single-phase and three-phase power. It fits almost every modern electric car sold in Australia, including models from Tesla, BYD, MG, Hyundai, Kia, and BMW.
Why Type 2 Plugs Are Great for Homes
- Fits Most Cars: Almost all modern electric cars in Australia use the Type 2 port for AC charging, so your family can charge different car brands with the same unit.
- Tethered or Untethered: You can buy a charger with the cable attached permanently (tethered), or buy a unit with a socket so you plug your own cable in (untethered).
- Safe Design: The 7-pin plug has built-in safety pins that talk to your car’s computer. Electricity only flows through the cable once the plug is locked safely into your car.
How Is an EV Charger Installed at Home? Step-by-Step
Understanding how an EV charger is installed can help you prepare your home. Here is how an EV charger gets installed:
- Power Check: The electrician will come to your home and inspect your switchboard, power limits and best route for the new cable.
- Installation: The EV charger unit is securely fitted to the wall or post outside your garage at an easy height.
- Cable Run: Thick heavy duty cables are run through protective piping from your switchboard to the new EV charger.
- Safety Switch: A dedicated safety switch (RCD Breaker) is fitted to your meter box to protect against shocks or overloads.
- Testing & Safety Certificate: The electrician will test the electrical current and provide you with an official Certificate of Electrical Safety.
- Final Set Up & Demonstration: The EV charger unit will be connected to your home Wi-Fi and the app setup on your phone. The electrician will show you how to plug your car in to charge.
Why You Must Use a Licensed Electrician for EV Charger Installation
Can any electrician install an EV charger at home? While any licensed electrician in Victoria can work on household wiring, it is always best to choose an electrician who specialises in EV charger setups.
Why DIY Is Dangerous and Illegal
Trying to install an EV charger by yourself is illegal in Australia. Doing your own electrical work can cause fires, dangerous electric shocks, severe injury, and will void both your car warranty and home insurance.
Why You Need an EV Specialist Electrician
- Power Safety Rules: Adding a large electrical load to an old home can overload your main power supply. Specialist installers know how to balance your household power so your lights do not flicker or trip.
- Official Safety Certificates: Every charger installed in Victoria must come with an official Certificate of Electrical Safety (COES). Your home insurance company will ask for this certificate if you ever need to make a claim.
- Solar Integration Setup: Setting up smart solar charging requires special sensors and technical knowledge to get your charger and solar inverter talking to each other.
Solar Power and EV Charging: Maximise Your Savings in Melbourne
If you already have solar panels on your roof, connecting them to a smart EV charger is the absolute best way to lower your daily driving costs.
Smart chargers can monitor how much solar energy your roof is generating in real time. Whenever your solar panels produce extra power, the charger sends that free energy right into your electric car.
Main Benefits of Solar Charging
- Drive for Free: Charging your car with daytime solar power drops your fuel costs down to zero dollars.
- Get Better Value from Solar: Exporting extra solar power back to the grid in Victoria gives you very low feed-in credits. Using that power in your car saves you from buying grid power at high night rates.
- Off-Peak Night Timers: If you drive to work during the day, smart chargers can be set to charge late at night when grid electricity rates are cheapest.
Frequently Asked Questions
How much does it cost to install an EV charger at home?
A Level 2 EV charger can be purchased and installed for between $1,250 and $4,500 in Melbourne. Basic charger units will cost around $500 to $900 and basic installation will cost $750 to $2,500. Long cable runs and switchboard upgrades will increase the cost.
What is a Type 2 EV charger?
Type 2 EV Chargers are the standard AC plug used for all electric cars in Australia. They have a 7 pin head with single and 3 phase capability for your home. Type 2 chargers can go up to 22kW and 7.4kW and are compatible with almost all modern electric cars in Australia.
How do you install an EV charger at home?
To install an EV charger, a licensed electrician mounts the wall charger, runs heavy cable from your main switchboard, fits safety breakers, tests the unit for electrical safety, and issues a official safety certificate. Installing a charger yourself is illegal and unsafe.
Can any electrician install an EV charger?
Whilst any licensed electrician in Victoria can work on your home electrics it is best to choose an EV installation specialist. Specialist installers understand household power limits, solar sensors, app controls, and correct manufacturer installation steps.
How long does EV charger installation take?
A basic EV charger can be installed in 2-4 hours in Melbourne. If more digging is required for underground pipes, long cable runs in your roof, and electrical switchboard upgrades can take between 5-8 hours.
Can I charge my EV using home solar panels?
Yes, you can easily charge your electric car using your rooftop solar panels. By using a solar-aware smart EV charger, the charger uses extra solar energy created by your solar panels during the day, letting you charge your car for free.
Power Your Electric Driving Experience with Next Phase Energy
Installing a dedicated home EV charger gives you fast, safe, and convenient charging every single day. By picking the right charger and using experienced installers, you can keep your electric car ready to drive while keeping your electricity bills low.
At Next Phase Energy, we provide professional EV charger supply and installation services for homes across Melbourne. Our team of licensed electricians will check your electrical switchboard, help you choose the best charger for your vehicle, and set up smart solar charging to save you money.
Ready to set up easy home charging?
Contact Next Phase Energy today at Next Phase Energy to request your home assessment and installation quote!